Illustration: A conceptual alignment chart illustrates a service report; it contains no actual test results.

AI-generated editorial illustrations; the scenes do not depict Titan personnel, premises or specific products for sale.

An alignment printout becomes more useful when you know what was measured and which specifications were selected. The colors are a quick display, while the vehicle details and before-and-after values provide the context.

Confirm the vehicle selection

Check that the report identifies the correct vehicle configuration. Mention modifications that may affect the applicable procedure. A technically precise measurement compared with the wrong specification is not a meaningful approval of the setup.

Illustration: A stationary vehicle on alignment equipment illustrates a workshop measurement setting.
AI-generated editorial illustration. A stationary vehicle on alignment equipment illustrates a workshop measurement setting.

Ask about the individual angles

Toe, camber and caster describe different aspects of wheel geometry. Ask the technician to explain which were outside the applicable range and which adjustments were performed. Some readings may not be directly adjustable without addressing another condition or following a specified repair procedure.

Illustration: A detached spring-and-damper assembly illustrates suspension components.
AI-generated editorial illustration. A detached spring-and-damper assembly illustrates suspension components.

Keep the explanation with the report

If a value remains outside the target, ask why and what that means for the vehicle. Green readings do not diagnose every cause of pulling, vibration or tire wear. Save the report with the mileage and repair details, then report any remaining driving concern. The printout supports a conversation about the completed work; it is not a promise that every chassis problem has been eliminated.

Sources and further reading

These resources provide technical background and consumer guidance for the decisions discussed above. Use the instructions for your exact vehicle and installed components when applying that information. Manufacturer examples describe their own products; Wikipedia is included for general terminology. Sources reviewed September 6, 2026.

A vehicle-specific next step

For help planning service in Madison or the Nashville area, bring the vehicle details and relevant records discussed in this guide. Confirm the inspection scope, current product availability and estimate with the shop.

Frequently asked questions

Does one red box always mean the shop performed the alignment incorrectly?

No. Ask about the specification, adjustability and vehicle condition. The reason for an unresolved reading should be explained.

Related guides

Continue reading